The QMill-8 is the best solution for final particle size between 15-20µm and 100µm (D50), Starting PSD of raw material is 2-3mm approx. The QMILL-8 is engineered to give higher product yield with batch size from 1kg to 500kg with productivity is from 0.5 to 50 kg/h.
| Name | q mill - 6 | q mill - 8 |
|---|---|---|
| Dimensions | 6” milling chamber | 8” milling chamber |
| Material | AISI316L | AISI316L |
| Gaskets | PTFE – FEP / Silicone | PTFE – FEP / Silicone |
| Surface roughness | < 0.25 μm – contact parts < 0.80 μm – non contact parts | < 0.25 μm – contact parts < 0.80 μm – non contact parts |
| Batch Size | Minimum 100 g – Maximum 100 kg | Minimum 1 kg – Maximum 500 kg |
| Productivity | Minimum 0.2 g/h – Maximum 30 kg/h | Minimum 0.5 g/h – Maximum 50 kg/h |
| Gas Consumtpion @ 7 barg | 42.8 Nm3/h | 67 Nm3/h |
| Gas Consumtpion @ 12 barg | 73.4 Nm3/h | 115 Nm3/h |
| Gas Consumtpion @ 100 psig | 26,7 SCFM | 42 SCFM |
| Gas Consumtpion @ 175 psig | 45,7 SCFM | 72 SCFM |
| Yield | > 80% | > 80% |
| Working pressure | From 2 up to 12 barg | From 2 up to 12 barg |
FPS is alongside its customers too after system installation and validation and offers them a specific replacement service set off. Our team of experts is able to provide customized spare parts lists to plan the periodic replacement of parts subject to wear, managing the entire life cycle of spare parts. We have decided to dedicate […]
Issues: Particle size reduction down to low micron is needed Operators must be protected because product is very dusty Large campaigns with expensive product: highest productivity is needed High Potent apis will be added in the future “High Potent Ready” solution: Air-tight separation cyclone with WIP to contain dust Modular micronization equipment for easy integration […]
Last month we asked our followers: Which is the best way to handle powders? Occupational Exposure Limits Quantities involved Particle size distribution Frequency & duration – process The right answer is Particle size distribution. Find out more here!
This week we asked our followers: how often do you check the status of your parts inventory? The possible answers were: Once every 2 months Once every 6 months Once a year Our advice Nowadays it is possible to have a real-time situation of parts inventory thanks to ERP systems. A proper management of safety stocks […]
