The QMill-10 is engineered for final particle size between 15-20µm and 100µm (D50). Starting PSD of raw material is 2-3mm approx. It is the best solution to give higher product yield with batch size from 5g to 2500Kg with productivity from 2 to 150kg/h.
| Name | q mill - 10 | q mill - 14 |
|---|---|---|
| Dimensions | 10” milling chamber | 14” milling chamber |
| Material | AISI316L | AISI316L |
| Gaskets | PTFE – FEP / Silicone | PTFE – FEP / Silicone |
| Surface roughness | < 0.25 μm – contact parts < 0.80 μm – non contact parts | < 0.25 μm – contact parts < 0.80 μm – non contact parts |
| Batch Size | Minimum 5 kg – Maximum 2500 kg | minimum 10 kg - maximum 5000 kg |
| Productivity | Minimum 2 g/h – Maximum 150 kg/h | minimum 5 g/h - maximum 300 kg/h |
| Gas Consumtpion @ 7 barg | 188 Nm3/h | 401 Nm3/h |
| Gas Consumtpion @ 12 barg | 322 Nm3/h | 687 Nm3/h |
| Gas Consumtpion @ 100 psig | 117 SCFM | 250 SCFM |
| Gas Consumtpion @ 175 psig | 201 SCFM | 428 SCFM |
| Yield | > 80% | > 80% |
| Working pressure | From 2 up to 12 barg | From 2 up to 12 barg |
FPS is alongside its customers too after system installation and validation and offers them a specific replacement service set off. Our team of experts is able to provide customized spare parts lists to plan the periodic replacement of parts subject to wear, managing the entire life cycle of spare parts. We have decided to dedicate […]
Issues: Particle size reduction down to low micron is needed Operators must be protected because product is very dusty Large campaigns with expensive product: highest productivity is needed High Potent apis will be added in the future “High Potent Ready” solution: Air-tight separation cyclone with WIP to contain dust Modular micronization equipment for easy integration […]
Last month we asked our followers: Which is the best way to handle powders? Occupational Exposure Limits Quantities involved Particle size distribution Frequency & duration – process The right answer is Particle size distribution. Find out more here!
This week we asked our followers: how often do you check the status of your parts inventory? The possible answers were: Once every 2 months Once every 6 months Once a year Our advice Nowadays it is possible to have a real-time situation of parts inventory thanks to ERP systems. A proper management of safety stocks […]
