Pin Milling technology is a well known mechanical milling method to achieve ne grinding of dry powders starting from a raw material of 1-10mm below to 70μm.
FPS PinMill is designed to reduce agglomerates of pharmaceutical, chemical and food products. The system includes hygienic design mill housing with interchangeable rotor and stator pins.
Size available: PinMill-100 and PinMill-200.
Yes in some cases you can. It’s going to depend on the process and the product. But first let’s start with some definitions. A mechanical mill grinds the product by crushing the particles between 2 mechanical parts: a static part called the stator and a moving part that rotates around it (called the rotor). Both are in the […]
Last month we asked our followers: Which is the best way to handle powders? Occupational Exposure Limits Quantities involved Particle size distribution Frequency & duration – process The right answer is Particle size distribution. Find out more here!
This week we asked our followers: how often do you check the status of your parts inventory? The possible answers were: Once every 2 months Once every 6 months Once a year Our advice Nowadays it is possible to have a real-time situation of parts inventory thanks to ERP systems. A proper management of safety stocks […]
Issues: Particle size reduction down to low micron is needed Operators must be protected because product is very dusty Large campaigns with expensive product: highest productivity is needed High Potent apis will be added in the future “High Potent Ready” solution: Air-tight separation cyclone with WIP to contain dust Modular micronization equipment for easy integration […]
Via Vandelli, 20
22100 Como (CO)
Ph. +39 031 543429
PLANT AND R&D CENTER
Via Romagnoli, 3
29017 Fiorenzuola d’Arda (PC)
Ph. +39 0523 984930
FPS AMERICA LLC
3 Raymond Drive, Suite 105
Glendale Ind. Park, Bldg 3
Havertown, PA 19083
Ph. +1 484-452-6655