The PilotMill-3 jet mill is suitable for R&D activities and the micronization of product batches starting from 3g and up to about 10kg, ensuring extremely low product loss.
| Name | pilot mill - 2 | pilot mill - 3 | pilot mill - 4 | pilot mill - 5 | pilot mill - 6 |
|---|---|---|---|---|---|
| Dimensions | 2” milling chamber | 3” milling chamber | 4” milling chamber | 5" milling chamber | 6" milling chamber |
| Material | AISI316L / PTFE / Ceramic inserts | AISI316L / PTFE / Ceramic | AISI316L / PTFE / Ceramic | AISI316L / PTFE | AISI316L / PTFE |
| Gaskets | PTFE – FEP / Viton - Silicone | PTFE – FEP / Viton - Silicone | PTFE – FEP / Viton - Silicone | PTFE - FEP / Viton - silicone | PTFE - FEP / Viton - silicone |
| Surface roughness | < 0.25 μm – contact parts < 0.80 μm – non contact parts | < 0.25 μm – contact parts < 0.80 μm – non contact parts | < 0.25 μm – contact parts < 0.80 μm – non contact parts | < 0,25 μm - contact parts < 0,80 μm - non contact parts | < 0,25 μm - contact parts < 0,80 μm - non contact parts |
| Batch Size | Minimum 1 kg - Maximum 3 kg | Minimum 3 g – Maximum 10 kg | Minimum 5 g – Maximum 60 kg | Minimum 100 g - Maximum 100 kg | Minimum 500 g - Maximum 250 kg |
| Productivity | Minimum 5 g/h- Maximum 1 kg/h | Minimum 50 g/h – Maximum 5 kg/h | Minimum 50 g/h – Maximum 18 kg/h | Minimum 0,2 kg/h - Maximum 30 kg/h | Minimum 0,25 kg/h - Maximum 50 kg/h |
| Gas Consumtpion @ 7 barg | 11.6 Nm3/h | 14.4 Nm3/h | 22 Nm3/h | 46,5 Nm3/h | 61,6 Nm3/h |
| Gas Consumtpion @ 12 barg | 19.8 Nm3/h | 24.7 Nm3/h | 37.8 Nm3/h | 79,7 Nm3/h | 105,6 Nm3/h |
| Gas Consumtpion @ 100 psig | 7,2 SCFM | 9,0 SCFM | 13,7 SCFM | 29,0 SCFM | 38,4 SCFM |
| Gas Consumtpion @ 175 psig | 12,3 SCFM | 15,4 SCFM | 23,6 SCFM | 49,7 SCFM | 65,8 SCFM |
| Yield | Up to 99,95% (depending on batch size) | > 99.5% (depending on batch size) | > 99.5% (depending on batch size) | > 99,5% (depending on batch size) | > 99,5% (depending on batch size) |
| Working pressure | From 2 up to 12 barg | From 2 up to 12 barg | From 2 up to 12 barg | from 2 up tp 12 barg | from 2 up to 12 barg |
Early drug development is increasingly important, and FPS supports that activity by offering new custom solutions that fit the specific needs of the Pharmaceutical, Biotech and Fine Chemical sectors. What do we mean by isolators for R&D and Pilot Plants? These machines are installed in research laboratories and/or pilot production plants, to ensure safe handling of active substances in […]
FPS has recently cooperated with pharmaceutical industry experts to research best jet mill practices for pharmaceutical. FPS strongly believes in knowledge sharing and continuous improvement. For this reason, FPS President, Eng. Gianola, and Vice President, Mr Corsini, both experts in milling and micronization technologies, worked with M. Nakach Ph.D on a research published in the Pharmaceutical Development and Technology Magazine. Mr. Nakach works at Sanofi. He […]
FPS has recently delivered a high containment Integrated systems for an Oncology plant in Bangalore. The system is composed by an ANFD discharge Isolator, a Vacuum Transport System (VTS) and a Micronization equipment PROMILL-8 in Isolator. “Our client searched an appropriate solution for -grinding material and clean packaging after the filtering and drying process-“ say […]
FPS is alongside its customers too after system installation and validation and offers them a specific replacement service set off. Our team of experts is able to provide customized spare parts lists to plan the periodic replacement of parts subject to wear, managing the entire life cycle of spare parts. We have decided to dedicate […]
