HammerMilling technology is a well known mechanical milling method to achieve fine grinding of dry powders starting from a raw material of 1-10mm below to 70μm.
Milling head completed with pin rotor and stator, operating speed up to 100m/s.
This system is completely customizable (from manual to fully automatic).
Size available: HammerMill-100 and HammerMill-200
The project definition always starts from on-site supervision to check installation area and discuss with end user about specific needs. In function of possible physical constraint first evaluation is about the possibility to use gravity discharge or to evaluate alternative system like Vacuum Transport System (VTS).
First of all, a preliminary design is realized and once the real project starts an ergonomic study on a 1:1 scale mock-up is performed to check real activities to be performed.
Once this critical step is completed the final manufacturing of the system is started.
FPS propose different configurations:
During the difficult months of the Covid-19 pandemic, FPS has developed an innovative new swab solution to ensure the absolute safety of operators and patients: the Swab Testing Station (STS).
Inspired by the Korean hospital of Yangji in Seoul, FPS has designed and constructed the first system to safely swab potentially infected patients by healthcare personnel located outside the station.
Tests only take a few minutes and are very safe because both the operator and the patient are never in direct contact. The cabins are easily transportable and, once positioned at strategic points (entrances of hospitals, pharmacies, neighborhoods, squares…), the STS will allow operators to perform 10 swabs in one hour.
The Swab Testing Station includes a completely safe removal system for the waste generated by the swabbing activities by means of a special container inside each cabin.
The STS is composed of 2 cabins and each is equipped with powerful ventilation that speeds up the aeration phase after sanitization to reduce the downtime between tests. The ventilation also allows the achievement of negative dynamic pressure inside each of the two cabins. Best in class filtration dramatically reduces the risk of potentially contaminated air escaping the station.
An intercom allows clear communication between the patient and the operator with the possibility to use pre-recorded audio with standard instructions (which can be done in different languages).
Click HERE for the video presentation and HERE the operating video
FPS may design and install turnkey solutions, up to ISO8 classification, complete with:
They are a convenient solution for process protection, dispensing or sampling activities.
FPS offers standard modular solutions for:
It is possible to install pack-off systems on existing equipment, reducing to a minimum the requested modification, in full compliance with all the final customer standard.
Custom designed configurations are also available integrated with:
Pin Milling technology is a well known mechanical milling method to achieve ne grinding of dry powders starting from a raw material of 1-10mm below to 70μm.
FPS PinMill is designed to reduce agglomerates of pharmaceutical, chemical and food products. The system includes hygienic design mill housing with interchangeable rotor and stator pins.
Size available: PinMill-100 and PinMill-200.
The QMill-2 has been engineered in order to give higher product yield to encounter all of these needs:
* 1g is minimum batch micronised
* Recovered product: more than 80%, starting from 0.2g batch
Despite the reduced dimensions, this jet mill keeps the same performances and advantages of bigger QMILL.
The QMill-8 is the best solution for final particle size between 15-20µm and 100µm (D50), Starting PSD of raw material is 2-3mm approx. The QMILL-8 is engineered to give higher product yield with batch size from 1kg to 500kg with productivity is from 0.5 to 50 kg/h.
The QMill-6 is required for final particle size between 15-20µm and 100µm (D50), Starting PSD of raw material is 2-3mm approx. The QMill-6 is engineered to give higher product yield with batch size from 100g to 100kg with productivity from 0.2 to 3 0kg/h.